Quiet Labs HUB-LOK Hex Cage 5″ Suppressor Adapter Kit, FDE
Quiet Labs HUB-LOK Hex Cage 5 inch Suppressor Adapter Kit in FDE, a titanium HUB adapter and aluminum shroud that stays with your suppressor.
Read more ↓3 in stock
Description
The Quiet Labs HUB-LOK Hex Cage 5" Suppressor Adapter Kit is a hard mount accessory interface built around the suppressor rather than the host firearm. The kit pairs a 1.375x24 HUB and Plan B compatible titanium adapter with a 5 inch hex profile aluminum shroud, and the whole assembly stays attached to the can as it moves between rifles. Nothing has to be pulled off, re-indexed, or re-timed when you swap hosts.
This FDE configuration covers suppressor bodies up to 5.1 inches in length, measured without the mount. Shooters running one suppressor across several uppers will get the most out of it, along with anyone who wants a heat shield that protects gear and hands without hanging off the handguard. Each adapter is checked for concentricity against a known good barrel, muzzle device, and suppressor with a precision alignment rod before it leaves the Quiet Labs facility.
Quiet Labs HUB-LOK Hex Cage 5" Suppressor Adapter Kit Features
- Grade 5 titanium adapter with 1.375x24 threading drops onto HUB and Plan B compatible suppressors, so the interface works with mounting hardware already in wide use
- Six screw mechanical lockup between cage and adapter creates a rigid, repeatable connection that holds its position under recoil and heat cycling
- 6061-T6 aluminum hex cage shields the suppressor body and helps mitigate contact burns to the shooter and surrounding equipment
- Open hex geometry works as a heat sink, pulling heat off the suppressor faster than a bare can during sustained strings
- Suppressor mounted design keeps alignment and configuration consistent across every host the can is run on
- Documented alignment verification with a time stamped photograph ships with each adapter
Specifications
- Condition: New
- Manufacturer: Quiet Labs
- Model: HUB-LOK Hex Cage 5" Suppressor Adapter Kit, FDE
- Frame Material: Grade 5 titanium adapter, 6061-T6 aluminum hex cage
- Finish Type: DLC coated adapter, MIL-A-8625 Type III hardcoat tanodized cage in Flat Dark Earth
- Included Accessories: HUB-LOK adapter, 5 inch hex cage, six screw mounting hardware, alignment verification photograph
- Additional Notable Specs: 1.375x24 HUB and Plan B compatible thread, covers suppressor bodies up to 5.1 inches excluding mount, 2.00 inch inside diameter, 2.25 inch outside diameter, 7.3 oz cage and adapter combined
Specifications
Related Products
-
YANKEE HILL MACHINEYankee Hill Machine HUB Direct Thread Mount, 5/8x24
-
SILENCERCOSILENCER CO CHARLIE PISTON MOUNT | OMEGA 36M
-
RESILIENT SUPPRESSORSResilient Surpressors Titanium Tri-Lug to HUB Adapter for 9mm
Reviews
There are no reviews yet.