Otter Creek Labs Infinity 7.62 Suppressor 1.375×24 HUB, Black
2 in stock
Description
The Otter Creek Labs Infinity is a 7.62 bore suppressor built around a swappable end cap system that lets the shooter dial back pressure to the host instead of settling for one fixed sound signature. It sits between the ultra high flow designs that give up sound performance and the sealed, high back pressure cans that push gas into the shooter's face. Development focused on 7.62 performance first, then refinement on 5.56, since most owners of a .30 caliber can spend the bulk of their range time behind an AR15.
Internally the suppressor is split into four chambers that vent, hold, combine, and then either hold or vent again depending on which end cap is installed. Three end caps ship in the box: a solid 5.56 cap for maximum suppression on tuned 5.56 rifles, a solid 7.62 cap as the middle setting for untuned gas guns and bolt actions, and a vented 7.62 cap for gas sensitive hosts, semi auto 7.62 rifles, and over gassed ARs. Swapping them takes seconds with the included wrench. The 1.375x24 HUB rear thread opens up the full range of industry standard mounting systems, and no mount is included with the suppressor.
Otter Creek Labs Infinity Features
- Three included end caps let you shift between high, medium, and low back pressure settings so one suppressor covers tuned 5.56 rifles, bolt guns, and over gassed semi autos
- Four chamber internal layout routes gas through an initial blast vent, a holding chamber, a combining chamber, and a high flow zone along the side wall for balanced sound and gas management
- DMLS printed and heat treated Inconel 718 construction handles hard use with no barrel length restrictions and no firing schedule limits on magazine fed guns
- Machined H900 17-4 stainless end caps thread on and off quickly with the supplied wrench, making host changes a bench task rather than a project
- 1.375x24 HUB rear threads accept the broad catalog of HUB compatible direct thread adapters and quick detach mounts
- 7.62 bore sized for .30 caliber hosts while delivering 5.56 performance close to a dedicated 5.56 bore can
Specifications
- Condition: New
- Manufacturer: Otter Creek Labs
- Model: Infinity
- Mount Type: HUB 1.375x24 (mount not included)
- Construction Material: DMLS 3D printed and heat treated Inconel 718 tube, machined H900 17-4 stainless steel end caps
- Full-Auto Rated: Yes, no firing schedule restrictions on magazine fed hosts; belt fed use calls for the vented end cap and cool down periods
- Finish Type: Black
- Included Accessories: Three end caps (solid 5.56, solid 7.62, vented 7.62), tube clamp, end cap wrench
- Additional Notable Specs: Length 6.5 inches without mount, weight 20 oz without mount, outside diameter 1.75 inches, optional vented 5.56 end cap sold separately
Reviews
There are no reviews yet.