B&T Print-X SQD-M 9mm Suppressor Tri-Lug, Titanium Gray
2 in stock
Description
The B&T Print-X SQD-M9 is a modular 9mm suppressor built around a 3D-printed titanium tube and B&T's Super Quick Disconnect tri-lug mount. It presses straight onto any in-spec 9mm tri-lug barrel and locks without tools, which puts it squarely in the submachine gun and pistol-caliber carbine lane alongside hosts like the B&T APC9, SPC9, GHM9, and the HK MP5 family. Releasing it takes a push of the tab, so swapping the can between hosts during a range session is quick work.
Bore rating covers 9mm along with 380 ACP and 38 Special, giving the can room across common pistol-caliber work. The Print-X construction is weldless, with titanium placed where the baffle stack and tube need it, and the Reduced Backpressure System can be turned on or off by swapping end caps. Between the two length stages and the two end cap options, the suppressor assembles into four distinct configurations, from a 6.1-inch compact setup to a 9.2-inch full-length build.
B&T Print-X SQD-M9 Features
- Super Quick Disconnect tri-lug mount attaches and releases one-handed with no tools, keeping host changes fast on the line
- Reduced Backpressure System that can be toggled by swapping between vented and non-vented end caps, letting you tune gas blowback to the host
- Fully 3D-printed titanium tube with weldless construction, cutting weight while keeping the structure sound under sustained fire
- Two length stages that drop overall length to 6.1 inches for a short, handy package or extend to 9.2 inches when suppression matters more than size
- Four total configurations from a single can, so one suppressor covers several roles without buying separate hardware
- Direct compatibility with in-spec tri-lug barrels including the APC9, SPC9, GHM9, and MP5 series
Specifications
- Condition: New
- Manufacturer: B&T
- Model: Print-X SQD-M9 (Ti)
- Caliber Rating: 9mm, 380 ACP, 38 Special
- Mount Type: SQD tri-lug (3-lug) quick detach
- Construction Material: 3D-printed titanium, weldless
- Finish Type: Type II anodized, Titanium Gray
- Overall Length: 6.1 in (Stage 1) to 9.2 in (Stage 2 extension)
- Weight: 13.6 oz to 19.8 oz by configuration
- Diameter: 1.7 in (45mm)
- MPN: SD-SQD-M-9
- Included Accessories: Stage 2 length extension, vented and non-vented end caps
Reviews
There are no reviews yet.