Mustang Armament RIP 11.5″ Pistol 223 Wylde, Tiger Stripe Bronze
2 in stock
Description
The Mustang Armament RIP 11.5 is a semi-automatic AR pistol chambered in .223 Wylde and built around suppressed shooting from the first machining operation rather than as an afterthought. Named in honor of Medal of Honor recipient Colonel John W. Ripley, USMC, it pairs an 11.5-inch cold hammer forged barrel with a midlength gas system, a Superlative Arms adjustable gas block, and a JP Enterprises H1 Silent Captured Spring so bolt velocity and gas drive stay balanced when a high-flow can is mounted. This example wears the Tiger Stripe Bronze finish.
Shooters who run a suppressor as standard equipment are the target audience here. The .223 Wylde chamber accepts both .223 Remington and 5.56 NATO, 1:7 twist rifling stabilizes heavier match and duty projectiles, and the component list leans on Radian, JP, Battle Arms, PWS, and Emissary Development hardware instead of generic parts. Mustang's 7075-T6 billet upper and lower are cut on a 5-axis process that completes as much geometry as possible in one setup, which is how the tight receiver fit is achieved without tensioning screws.
Mustang Armament RIP 11.5 Features
- 11.5-inch Duty Precision Taper cold hammer forged barrel in 41V50 chrome moly vanadium, spiral fluted to shed weight while keeping material where rigidity and heat tolerance matter
- Midlength gas system tuned around dedicated high-flow suppressor use, with a Superlative Arms adjustable gas block giving a precise tuning point for the operating cycle
- JP Enterprises H1 Silent Captured Spring on a JP-SPEC seven-position receiver extension, smoothing the recoil impulse and keeping bolt carrier behavior controlled under suppressed pressure
- Enhanced anti-tilt DLC-coated 4140PH bolt carrier group, HPT and MPI tested and shot peened, paired with a Radian Raptor LT gas-busting ambidextrous charging handle
- Mustang exclusive 3.5 lb flat-face single-stage trigger with a very short reset, supported by a Radian Talon ambidextrous safety, Radian bolt catch, and Battle Arms takedown pins and magazine release
- Emissary Development Axle grip, Accelerator foregrip, and rail panel package over a flared magazine well and oversized ejection port with Mustang's enhanced tactile port cover
Specifications
- Condition: New
- Manufacturer: Mustang Armament
- Model: RIP 11.5 Pistol
- Caliber: .223 Wylde
- Operating System: Semi-automatic, midlength gas
- Frame Material: 7075-T6 billet aluminum upper and lower
- Barrel Type: Cold hammer forged, spiral fluted, nitride treated
- Barrel Steel: 41V50 chrome moly vanadium
- Barrel Length: 11.5"
- Twist Rate: 1:7
- Barrel Extension: Nickel Boron coated
- Muzzle Thread: 1/2x28
- Muzzle Device: Rearden R2S, Plan B compatible
- Gas Block: Superlative Arms adjustable
- Magazines/Capacity: 30-round capacity
- Safety System: Radian Talon ambidextrous selector
- Trigger: Mustang exclusive 3.5 lb flat-face single-stage
- Bolt Carrier Group: DLC-coated 4140PH steel, HPT/MPI, anti-tilt
- Charging Handle: Radian Raptor LT ambidextrous
- Recoil System: JP Enterprises H1 Silent Captured Spring
- Receiver Extension: JP-SPEC seven-position
- Castle Nut/End Plate: PWS enhanced ratcheting castle nut, end plate with QD sling point
- Grip: Emissary Development Axle
- Foregrip: Emissary Development Accelerator
- Finish Type: Tiger Stripe Bronze
Reviews
There are no reviews yet.